Forums59
Topics1,039,182
Posts13,960,486
Members144,192
|
Most Online39,925 Dec 30th, 2023
|
|
fishfinder flush mount on metal surface GPS reception ?
#11436009
02/24/16 04:51 PM
|
Joined: Aug 2013
Posts: 73
bluecoat
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Aug 2013
Posts: 73 |
I have my trolling motor fish finder, a Lowrance HDS 7 Gen 2 touch sitting in the factory U-shaped plastic bracket mounted to front floor of my aluminum boat. Going to have an aluminum "box" frabricated that I will then screw down to the floor and permenantly flush mount the HDS to the top of it. All the wires will then be hidden and the box will be painted to match the boat giving the unit a built in look. The question: will flush mounting the HDS to a metal surface cause interference with the GPS signal? The box will be constructed so the unit is sitting at the same angle just like it was in the bracket. Anybody have any expierence with this? Thanks in advance.
|
|
Re: fishfinder flush mount on metal surface GPS reception ?
[Re: bluecoat]
#11436077
02/24/16 05:09 PM
|
Joined: Dec 2012
Posts: 6,687
44 Diesel
TFF Celebrity
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,687 |
Not unless you have a heading sensor puck. If it's an internal GPS or a just GPS puck you will be good , it communicates with satellites only. Only the GPS pucks that have an internal compass feature that show boat boat direction would be effected
|
|
Re: fishfinder flush mount on metal surface GPS reception ?
[Re: bluecoat]
#11451092
03/02/16 01:28 PM
|
Joined: Aug 2013
Posts: 73
bluecoat
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Aug 2013
Posts: 73 |
Mine is internal GPS, painted the box and mounted everything yesterday...works perfectly. Thanks for the info.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|