1)Dense, hand picked balsa is cut, drilled, multi-coat sealed, multi-coat primed, then painted.
2)Rear hook hanger is screwed into a hardwood dowel which has been inserted in the tail.
3)Belly weight/ hook hanger and Lexan bill are glued in with an incredibly strong glue.
4)Pull point is drilled and inserted through the bill. They are all in the same position and they will
not move unless you move them.
5)Stainless hardware will not rust or corrode.
6)All baits are finished with an epoxy gel coat, not a thin, less durable lacquer or acrylic.
7)All WEC baits are hand-initialed on the bill by Mr. Ed Chambers himself making them"collector's items"?