Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Epp, Carlos795, Kenoel, D DAVID G, Mach22
106787 Registered Users
Top Posters
TexDawg 87559
hopalong 78854
Pilothawk 75989
JDavis7873® 67386
John175 � 66193
FattyMcButterpants 60834
Derek 🐝 59302
Tritonman 57847
LoneStarSon® 54023
SkeeterRonnie 53183
facebook
Forum Stats
106787 Members
61 Forums
867529 Topics
12327699 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11378134 - 01/28/16 10:57 PM Replacing a livewell Open/Close valve???
4976sc Offline
Outdoorsman

Registered: 04/22/14
Posts: 90
I broke my livewell open close actuator today and I've read that it's probably due to the valve being gummed up and stuck. Also my other livewell is draining slow so it may be stopped up as well so going to try and replace both valves while I'm at it. My question is how do I go about getting to the valves in the battery compartment (anything I have to remove and take out?) and how hard is it to do on your own. Just don't want to pay the shop $70 an hour for them to do it when I could do it myself. I have a 05 skeeter zx. Thanks

Top
#11378140 - 01/28/16 11:00 PM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
Fish Killer Online   happy
Big Sexy

Registered: 12/11/04
Posts: 25779
Loc: Weatherford
Pull the oil tank and span plate
The valves are under there in the bottom of the bildge

You can replace or rebuild them

Flowrite.com Has all the parts and pieces
_________________________
LIKE the TFF on Facebook - www.facebook.com/texasfishingforum

Top
#11378144 - 01/28/16 11:03 PM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
184Champion Offline
Outdoorsman

Registered: 11/24/15
Posts: 104
Loc: Arlington TX
Usually on the Skeeters there is a plate mounted across the bilge that either has a battery charger or oil tank mounted to it. Unscrew that and move it out of the way and the valves should be right there. There are a couple different valves so make sure you get the correct ones. If you have to replace the cables also, tie a string to the cable ends and pull them out, Use the string to pull them back through.

Top
#11378162 - 01/28/16 11:22 PM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
4976sc Offline
Outdoorsman

Registered: 04/22/14
Posts: 90
Thank y'all very much

Top
#11380084 - 01/29/16 08:52 PM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
fish pal al Offline
Outdoorsman

Registered: 04/22/12
Posts: 29
_________________________
Happy fishing, Al

Top
#11380352 - 01/30/16 01:56 AM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
Flippin-Out Offline
Extreme Angler

Registered: 02/25/15
Posts: 2141
Loc: Magnolia, TX
Do skeeter boats all have flow-rite from the factory? Some other brands use T & H Marine valves, which have a different actuator & actuator hole size.


Edited by Flippin-Out (01/30/16 01:57 AM)

Top
#11380487 - 01/30/16 08:00 AM Re: Replacing a livewell Open/Close valve??? [Re: 4976sc]
Tommy Yetts Offline
TFF Team Angler

Registered: 12/14/02
Posts: 3539
Loc: Rockwall, TX USA
Skeeters use the Flow Rite valves.
_________________________
Rockwall Marine
Tommy Yetts

www.rockwallmarine.com

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide