Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
BorderBassBattle, Trisha d'Fisha, Bperez, Strokn88lx, Maverickoutdoorstx
103156 Registered Users
Top Posters
TexDawg 83695
hopalong 74991
Pilothawk 73819
JDavis7873® 67378
John175 ® 61101
FattyMcButterpants 60593
Tritonman 57174
Derek 56843
SkeeterRonnie 52571
LoneStarSon® 52419
facebook
Forum Stats
103156 Members
62 Forums
865564 Topics
11362420 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11336059 - 01/10/16 10:37 AM Help with jack plate
Robert 310 Offline
Outdoorsman

Registered: 10/05/15
Posts: 31
Loc: Corsicana, TX
I recently bought a 2009 skeeter with a 150 vmax. 1st boat!!!!! Here is me provlem. With just me in the boat, it'll jump out of the hole in a fee seconds and run well. You put a second person in it and it doesn't jump on plane. My passenger sat on the front casting deck and it will jump up on plane. I've beed told that my jack plate is probably out of adjustment. Has anyone dealt with this?


Edited by Robert 310 (01/10/16 10:40 AM)
_________________________
2000 Skeeter ZX180
150 Yamaha VMax
"Nothing makes a fish bigger than ALMOST being caught"

Top
#11336214 - 01/10/16 12:00 PM Re: Help with jack plate [Re: Robert 310]
2015fordnut Online   sick
Extreme Angler

Registered: 06/24/09
Posts: 1724
Loc: Garland, TX
Center of propshaft should be 3 1/2" below pad, or call Steve.

www.hydrodynamics-usa.com
903-763-5225
_________________________

Top
#11336227 - 01/10/16 12:08 PM Re: Help with jack plate [Re: Robert 310]
Flippin-Out Offline
Extreme Angler

Registered: 02/25/15
Posts: 1564
Loc: Magnolia, TX
Robert,

Since you mention this is your first boat and I don't know anything about you I have to ask.....do you know how to use the engine's trim properly as well?

Top
#11336833 - 01/10/16 04:55 PM Re: Help with jack plate [Re: Robert 310]
Robert 310 Offline
Outdoorsman

Registered: 10/05/15
Posts: 31
Loc: Corsicana, TX
I think so. I am starting with it all the way down and adjusting on plane. It is great with one person. Add a second and it just wont get up it just rides nose up.
_________________________
2000 Skeeter ZX180
150 Yamaha VMax
"Nothing makes a fish bigger than ALMOST being caught"

Top
#11336841 - 01/10/16 05:00 PM Re: Help with jack plate [Re: Robert 310]
hopalong Online   content
Super Freak

Registered: 09/06/08
Posts: 74991
Loc: manager, drake river ranch (fo...
http://www.stevescustomprops.com/faq.html#How_do_I_adjust_the_Prop_shaft_engine_height_


use the link above, set your plate so the shaft is 3.5" and go from there, adjust up till you just start to lose some water pressure then drop back 1/4" or so and call it good.

you may need some prop work too, prop may be wrong for that hull, call steves and talk to them.
_________________________


Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide