Main Menu
Newest Members
RodRaider55, CoachBlackburn, Dug1970, K-Machado, RadarLuv
107363 Registered Users
Top Posters
TexDawg 88103
hopalong 78894
Pilothawk 76176
JDavis7873® 67390
John175® 66790
FattyMcButterpants 60846
Derek 🐝 59752
Tritonman 57914
LoneStarSon® 54248
SkeeterRonnie 53292
Forum Stats
107363 Members
60 Forums
873618 Topics
12415550 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11329584 - 01/07/16 03:02 PM Help -- Motorguide TM
Ranger-188-2007 Online   content
TFF Team Angler

Registered: 01/03/04
Posts: 3673
Loc: Nacogdoches Tx. USA
Okay I have a foot controlled 24volt digital 82 lb thrust motor 2007 model. It suddenly came on when no one was in the boat. Running high 24. The only way it would shut off was by the circuit breaker in the back of the boat. I have replaced all 3 switches on the foot and it's still running high 24. What's up with it? Any ideas? The on/off switch on the left side of the foot pedal cuts it off and on only!
All fishermen are legends in their own minds! Ranger Boats, Yamaha Outboards, Humminbird Electronics,Motor guide, and all the tackle in the world.

#11329677 - 01/07/16 03:28 PM Re: Help -- Motorguide TM [Re: Ranger-188-2007]
Flippin-Out Offline
Extreme Angler

Registered: 02/25/15
Posts: 2141
Loc: Magnolia, TX
Contact Jones Trolling Motor; he's here in the TFF. It sounds like you have a fried control board. BTW, you should be flipping that breaker to OFF every time before you energize the charger. I believe that MG states that motors can be damaged by charging circuits, thereby necessitating the use of that combo switch/breaker. They made it work like a switch as well as a breaker for that very reason. Your charger may have caused this failure.....


© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide