Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
German Jr Sanchez, USMCMPD151, Ripinlip, waver, philmoye8@gmail.com
105124 Registered Users
Top Posters
TexDawg 85184
hopalong 77641
Pilothawk 74781
JDavis7873® 67382
John175 ® 63645
FattyMcButterpants 60667
Derek 🐝 57764
Tritonman 57469
SkeeterRonnie 52916
LoneStarSon® 52878
facebook
Forum Stats
105124 Members
60 Forums
844556 Topics
12043120 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11265933 - 12/06/15 05:23 PM Yamaha 130hp not firing. Power pack?
Blues Online   crying
Extreme Angler

Registered: 01/23/12
Posts: 1886
Tested pack with cdi's troubleshooting guide. I have proper ohms on all checks, good voltage from stater, NO voltage from pack to coils. Bad pack??

Top right voltage is good on the brown, red, and black wires from stater. No voltage on top left black coil wires when cranking.


Top
#11266617 - 12/07/15 12:01 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
OldFrog Offline
TFF Guru

Registered: 02/16/06
Posts: 48345
Loc: Probably not where you think
Swap the power packs and see if the dead coil swaps sides.
_________________________
Now, Donald...please pick John Bolton for your running mate.

Top
#11266778 - 12/07/15 07:45 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
Blues Online   crying
Extreme Angler

Registered: 01/23/12
Posts: 1886
It's all 4 cylinders. All 4 black coil wires on the top left have 0 volts when cranking. Removed the white kill wire, 5th wire down on the left. This is supposed to rule out the kill switch, still 0 volts on coils. Cdi guide says 125v minimum per coil wire, if I am reading it and testing correctly?

Ran great two trips ago then acted like it had bad fuel or something when loading. Removed and cleaned carbs and took it back out. Same thing, sputtered and missed. Loaded back up and thought I'd check fire on all cylinders the next day and nothing, just cranks and cranks. Tested fire on 1 through 4 and nothing, tested power pack and if I'm doing it correctly and understand the test, I have no volts. New pack is $400-500 which is a pretty big lick for me, so I want be sure before I buy.

Top
#11266884 - 12/07/15 08:29 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11029
Loc: Littlefield Tx & Lake A. H. US...
It could be. Problem is it can be the timing base not sending a signal to the power pack. Is the TB the 4 bottom right wires? Make sure you didn`t leave a ground wire loose after carb work.
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top
#11267133 - 12/07/15 10:14 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
Blues Online   crying
Extreme Angler

Registered: 01/23/12
Posts: 1886
I assume they are. Top right 4 wires come from stater brown has 90v, red and black have 16v, haven't traced back or tested for voltage on bottom right 4 wires.

Top
#11267151 - 12/07/15 10:21 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
opus Online   content
TFF Celebrity

Registered: 07/15/07
Posts: 6892
Loc: West Tx no. of waco
What yr is it I have a new one for cheep wouldnt fit my 94 its a CDI 113-3101
_________________________
http://www.catfishin.net/index23.html

Top
#11267204 - 12/07/15 10:39 AM Re: Yamaha 130hp not firing. Power pack? [Re: Blues]
Blues Online   crying
Extreme Angler

Registered: 01/23/12
Posts: 1886
It's a 92.

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide