Can anyone share the specs for the UV Blast bakeing cure time and temp? The jar don't have any instructions on it.Should the initial coat of colored powder be cured before the UV blast is applied or cure it after just 1 time after all coats is applied?
Thanks In Advance

When I use it, I dip in color paint and right into the UV Blast! I cure most all my heads at between 392 and 400. Since most of the time I use a small toaster oven it's not hot when I put them in so I go 17 minutes. If I was using the big oven and it's hot, then 15 minutes and not any longer! One color though is not for that kind of heat and that is Pearl White!

Skip

Thank You Skip I was beginning to wonder if it was a trade secret.LOL

LOL no, but seems lots have different time and temps to use. I have called CSI about this probably 6 or more times over the years. I use to order paint from them and seemed like every year they would send a sheet with temps and times, but it would change. So that is why I talked to them so many times plus anything new. The last time they moved a lot to 400 degrees for 10 minutes, but I never found that to work well. The only thing you have to be careful about is with Flame Red and if you go too long on it, the color will end up really bad.

I have that list posted on a sticky over on cdc jig board. Once I thought about it I don't remember if it had the UV Blast on it or not!

Skip