We just moved to the coast and our new place has and awesome 1400 sq ft shop. But it was a mess and took months to clean it out, in fact I hauled 1,100 pounds of assorted metal to the scrap yard. But some good things also happened. I found a stack of wire panels used for building storage cubicles.
So I got a brainstorm of fabricating a crate for my yaks. Materials on hand were the panels, assorted PVC, electric wire ties.
So I take the wire ties and connect the panels to form a cube, leaving the top connected only one one side so it opens.
Then I cut some 3" PVC about 8 inches long and use the 12 inch wire ties to strap it to the cube.
Then I cut 2 pieces of 1 1/4" PVC about 10 inches long and strap them to the backside of the cube.
After that I cut some of the panels in half and installed three of the pieces to form dividers, added a bungee cord from front to back and tied it off so I could easily slip it over to one side to open the lid.
and it all looks like this.