Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Wildman1, TheMattador, Ray1216, David Brown, Bryan2014
108001 Registered Users
Top Posters
TexDawg 88596
hopalong 78895
Pilothawk 76389
John175® 67555
JDavis7873® 67390
FattyMcButterpants 60868
Derek 🐝 60239
Tritonman 57988
LoneStarSon® 54394
SkeeterRonnie 53365
facebook
Forum Stats
108001 Members
60 Forums
810930 Topics
10270499 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11181328 - 10/23/15 02:13 PM Swapping Minn Kota's
Hunter's Dad Offline
Pro Angler

Registered: 01/29/09
Posts: 912
Loc: Between Rayburn and Toledo
What is the easiest way to swap Minn Kota Maxxum trolling motors from the mount? I have two Minn Kota Maxxums and would like to be able to swap them quickly in case on goes down in a tournament. This happened last year before I got the spare and I switched mount and all out with a motorguide to make it through the rest of the day. With motorguide its easy you just loosen a knob. The Minn Kota looks much more complicated with the housing and spring.
_________________________

Top
#11181574 - 10/23/15 04:17 PM Re: Swapping Minn Kota's [Re: Hunter's Dad]
Jones Trolling Motor Offline
Pro Angler

Registered: 05/01/11
Posts: 528
Loc: NE Texas/SW Arkansas
there is two "pins" that hold the bowguard to the mount. One pin on the upper arm has two 1/2" nyloc nuts on the ends, one pin goes on the bottom and has a spring clip on the inside. Partially deploy the motor, remove the handle from the rope (It goes through the bowguard), then remove the two pins and the motor will fall off in your hands.
_________________________

www.jonestrollingmotor.com
texarkana, Ark/Tx

Top



© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide