Recently, I have been having issues with the starboard livewell aeration. The light on the control panel (front & back) keeps flashing. I have reset the circuit by holding the button down for 5 seconds. This only randomly works as in sometimes it will reset and start working, while others it will just keep flashing continually.

I figured there was an issue with the pump cartridge and therefore I replaced both livewell aeration pump cartridges, since I had two batteries and the battery tray removed already. This did not solve the issue at hand and the light is still blinking and will not reset. As I mentioned before, the pump did work at random times when attempting to reset the circuit even after pump cartridge replacement but still not consistent nor did it fix the problem

I was wondering if anyone out there has experienced a similar problem or could shed some light on what to do next? In a perfect world, I would like to try and solve this problem at home before sending it in to a dealership, while they scratch their heads over this issue as well.

Any help or information would be greatly appreciated! Thanks!

The main problem with the touch pad systems has been voltage drop at the fuses or main breaker. Some touch pads are still under warranty. Good Luck

Thanks! I have been told that these touch pads will freak out for whatever reason.

I tried it last night before I went to sleep and I got the same flashing light and it wouldn't reset. But I tried it this morning and it work properly 1st try and I haven't touched anything but the power switch and the starboard livewell aeration button.

It acts weird enough to drive you mad!

My next thing to check/try I guess would be the PME behind the driver seat and see if everything is tight and okay there, then I suppose a new control panel?