Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
ladyangler125, AHS Basser, MoJoMorris, suhil has, Jr baiter
106516 Registered Users
Top Posters
TexDawg 87125
hopalong 78812
Pilothawk 75784
JDavis7873® 67386
John175 ® 65888
FattyMcButterpants 60793
Derek 🐝 59024
Tritonman 57763
LoneStarSon® 53818
SkeeterRonnie 53123
facebook
Forum Stats
106516 Members
61 Forums
863936 Topics
12277571 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11139191 - 10/01/15 11:52 AM Lowance Linking
forkduc Offline
TFF Guru

Registered: 03/28/07
Posts: 11369
Loc: Plano,Texas
I have a 12 touch on console and 9 touch on nose that are supposedly linked. I can't get charts or side imaging on the front,even though the source says HDS12. Any helpful ideas?

Top
#11139560 - 10/01/15 02:27 PM Re: Lowance Linking [Re: forkduc]
Jones Trolling Motor Offline
Pro Angler

Registered: 05/01/11
Posts: 501
Loc: NE Texas/SW Arkansas
Do you know if they are linked through eithernet or NMEA2000, or both?
_________________________

www.jonestrollingmotor.com
texarkana, Ark/Tx

Top
#11139663 - 10/01/15 03:17 PM Re: Lowance Linking [Re: Jones Trolling Motor]
forkduc Offline
TFF Guru

Registered: 03/28/07
Posts: 11369
Loc: Plano,Texas
Don't know. I bought a 2014 Skeeter,a guides boat.

Top
#11140509 - 10/01/15 09:41 PM Re: Lowance Linking [Re: forkduc]
grout-scout Online   content
TFF Celebrity

Registered: 12/08/08
Posts: 6395
Loc: Boerne, Texas
For map sharing and LSS sharing you don't need it to say the other graph as source. Those 2 items are shared automatically through the Ethernet cable (the yellow cable). You will need the graphs to have at least the 2.0 update to have map sharing as well. If your graphs have never been updated to your knowledge then it wouldn't hurt to update them.


So first off make sure you have the yellow Ethernet cable hooked up.

Top
#11142016 - 10/02/15 04:37 PM Re: Lowance Linking [Re: grout-scout]
forkduc Offline
TFF Guru

Registered: 03/28/07
Posts: 11369
Loc: Plano,Texas
My thought is there is not an ethernet connection. Both are flush mounted,so a pain to pull them and look. The only thing I get on front is sonar from the 12 or I can get it from trolling motor transducer. I do know that if I set the front to be its own source it screws up downscale on the 12.

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide