Main Menu
Newest Members
Crappiewannabe, Ejones, petersj056, bbenson, HK FISHING
107750 Registered Users
Top Posters
TexDawg 88385
hopalong 78895
Pilothawk 76322
JDavis7873® 67390
John175® 67221
FattyMcButterpants 60846
Derek 🐝 60040
Tritonman 57953
LoneStarSon® 54316
SkeeterRonnie 53336
Forum Stats
107750 Members
60 Forums
807870 Topics
10232657 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11041538 - 08/14/15 09:40 AM i got a 1991 mercury 8hp motor
Ryan B Offline

Registered: 06/13/15
Posts: 193
I got it from a buddy at work. It has been sitting for years and its missing the prop. It has compression and everything. Its just missing the prop. Is it a good motor? Is it reliable? It is a 2 stroke. And what's a good parts website for this motor? Where can I find the prop? Any help will be appreciated.
19 year old angler. Work hard Fish Harder!!!

#11042119 - 08/14/15 02:47 PM Re: i got a 1991 mercury 8hp motor [Re: Ryan B]
Ricky Taylor Online   content
Extreme Angler

Registered: 10/19/14
Posts: 1930
Loc: Midlothian, Texas
This ought to get you started, I would recommend removing the old plugs, and squirting some 2-stroke oil in the cylinder, let it sit overnight, next spin the fly wheel and squirt a little more in, and then let it soak overnight again and then after that session install new plug. I would without a doubt change the impeller and impeller housing, and then IN MY OPINION (My OPINION!) I would gut the thermostats if you plan on running shallow, If not then just get new t-stats. GOOD LUCK

Here's Your Manual... Highly suggest ordering it.

Here's All Your Parts... Enter in your Ser. # of the motor

Here's Your Prop Selection... Call a dea...mum performance
PB: 11.49 - Joe Pool - 3/10/18


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide