Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Mason777, RealCamSmith, Ol' Swamp Badd, Redneckcrappiedude, Djbfishing
103981 Registered Users
Top Posters
TexDawg 84216
hopalong 75951
Pilothawk 74193
JDavis7873® 67380
John175 ® 62192
FattyMcButterpants 60645
Tritonman 57318
Derek 57168
SkeeterRonnie 52704
LoneStarSon® 52586
facebook
Forum Stats
103981 Members
61 Forums
833055 Topics
11901300 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11035855 - 08/11/15 04:32 PM Wanting to add structure scan to hds 7 gen 1. Need help.
ridinonthepad Offline
Outdoorsman

Registered: 04/18/15
Posts: 92
Loc: Lake Texoma
I have a new (used) hds 7 gen 1 I bought from a buddy. I would like to add structure scan but I dont know what all is required for the upgrade. Can someone help me with this and how much can I exoect to spend for this. Additionally I moved my elite 5 hdi to the bow when I installed the hds 7. The transducers are side by side on the transom. The elite is set at 83 khz and the hds 7 at 200. Should that take car of interference issues? I cant mount the elite 5 on the t/m because I am running an i5.

Top
#11036848 - 08/12/15 07:14 AM Re: Wanting to add structure scan to hds 7 gen 1. Need help. [Re: ridinonthepad]
Jones Trolling Motor Offline
Angler

Registered: 05/01/11
Posts: 457
Loc: NE Texas/SW Arkansas
As long as you keep the frequencies separated, cross talk won't take place. For the addition of SS, you will need the LSS2 unit with the LSS2 transducer. It will come with an ethernet cable to connect to the 7.
John
_________________________

www.jonestrollingmotor.com
texarkana, Ark/Tx

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide