Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Lsu_23, Ranger MG, ilikebigguts, Pancho_Pistolas, m&m fishing
105445 Registered Users
Top Posters
TexDawg 85617
hopalong 78097
Pilothawk 74935
JDavis7873® 67382
John175 ® 64332
FattyMcButterpants 60667
Derek 🐝 58029
Tritonman 57517
LoneStarSon® 53059
SkeeterRonnie 52940
facebook
Forum Stats
105445 Members
60 Forums
798337 Topics
10091134 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#10993877 - 07/22/15 02:52 PM Trim Issues with my 2004 Mercury EFI
Vinny Chase Offline
Outdoorsman

Registered: 02/03/11
Posts: 230
Loc: Minneapolis, MN
Hey TFF

I have confused as could be when it comes to my latest trim issue on my 2004 Merc. 200HP EFI. When I go to trim up there is a delay from when I engage to when it starts any movement, but I can hear the solenoid in between. I thought it might be an electrical, which is still very well could, but this occurs both from the motor and console triggers. The other confusing this about my situation is that the trim down works perfectly fine. My first thought was replacing the trim fluid, but wouldn't both up and down be acting up if it were a fluid issue?

Any help whatsoever would be awesome and thanks in advance,

VC


Edited by Vinny Chase (07/22/15 08:02 PM)

Top
#10993928 - 07/22/15 03:11 PM Re: Trim Issues with my 2004 Mercury EFI [Re: Vinny Chase]
kingdad101 Offline
TFF Guru

Registered: 10/24/05
Posts: 20734
Loc: W.F. Texas
Originally Posted By: Vinny Chase
Hey BBC,

I have confused as could be when it comes to my latest trim issue on my 2004 Merc. 200HP EFI. When I go to trim up there is a delay from when I engage to when it starts any movement, but I can hear the solenoid in between. I thought it might be an electrical, which is still very well could, but this occurs both from the motor and console triggers. The other confusing this about my situation is that the trim down works perfectly fine. My first thought was replacing the trim fluid, but wouldn't both up and down be acting up if it were a fluid issue?

Any help whatsoever would be awesome and thanks in advance,

VC


if you get any answers from the BBC, please post them here....

Top
#10993931 - 07/22/15 03:13 PM Re: Trim Issues with my 2004 Mercury EFI [Re: Vinny Chase]
militarybrat Offline
Extreme Angler

Registered: 06/02/11
Posts: 2640
Loc: dalllas texas
This is the TFF. That said your issue may just be a waek coil in the trim relay (solenoid). Try swapping the relays to see if the problems change from up to down. If so replace the bad relay or both of them.
_________________________
Who ever said nothing in life is impossible.
Never tried slamming a revolving door.

Top
#10994584 - 07/22/15 08:03 PM Re: Trim Issues with my 2004 Mercury EFI [Re: Vinny Chase]
Vinny Chase Offline
Outdoorsman

Registered: 02/03/11
Posts: 230
Loc: Minneapolis, MN
Sorry guys, just did a copy paste and did also post over at BBC. Any help would be much appreciated

Top
#10994585 - 07/22/15 08:05 PM Re: Trim Issues with my 2004 Mercury EFI [Re: Vinny Chase]
Vinny Chase Offline
Outdoorsman

Registered: 02/03/11
Posts: 230
Loc: Minneapolis, MN
Thanks MilitaryBrat! I will give that a try

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide