Forums59
Topics1,039,144
Posts13,959,926
Members144,192
|
Most Online39,925 Dec 30th, 2023
|
|
repairing cracked weld In middle of the hull
#10934197
06/23/15 04:06 AM
|
Joined: May 2015
Posts: 16
brdnckl1
OP
Green Horn
|
OP
Green Horn
Joined: May 2015
Posts: 16 |
I have a cracked weld in the middle of my hull about 8 ft from the transom. Is there a epoxy I can use to seal this temporarily?
|
|
Re: repairing cracked weld In middle of the hull
[Re: brdnckl1]
#10934387
06/23/15 12:15 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
Their is some made for aluminum. It will need to be stop drilled and re-welded. When you patch aluminum with epoxy, it makes it more difficult to fix right. What boat is it. Some are guaranteed for life.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
Re: repairing cracked weld In middle of the hull
[Re: brdnckl1]
#10935812
06/23/15 09:30 PM
|
Joined: Aug 2011
Posts: 2,957
Bob Landry
Extreme Angler
|
Extreme Angler
Joined: Aug 2011
Posts: 2,957 |
Welding is the only appropriate fix for aluminum. Anything else just makes a good repair harder.The crack needs to be ground out and tig welded and filled. If you have a floor in your boat and it is removable, you might want to pull it and check all of the horizontal ribs for cracked welds. if you hit something hard enough to break one, it's very possible there are more.
2015 Seaark 1872 MV CC Etec-90 Two Helix 12 CHIRP SI's, , MinnKota Riptide ST80/i-pilot Link, Bob's Hydraulic 2020 Robalo R200 CC, Yamaha 150
Bitter Gun Owner Bitter Clinger Armed Infidel
|
|
Re: repairing cracked weld In middle of the hull
[Re: Bob Landry]
#10944116
06/28/15 12:49 AM
|
Joined: Nov 2008
Posts: 1,558
BassHunter 69
Extreme Angler
|
Extreme Angler
Joined: Nov 2008
Posts: 1,558 |
Welding is the only appropriate fix for aluminum. Anything else just makes a good repair harder.The crack needs to be ground out and tig welded and filled. If you have a floor in your boat and it is removable, you might want to pull it and check all of the horizontal ribs for cracked welds. if you hit something hard enough to break one, it's very possible there are more. +1
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
Re: repairing cracked weld In middle of the hull
[Re: brdnckl1]
#10947401
06/29/15 10:08 PM
|
Joined: Aug 2006
Posts: 4,010
machinist
TFF Team Angler
|
TFF Team Angler
Joined: Aug 2006
Posts: 4,010 |
don't use epoxy. use silicone it is flexible
I fish on the edge and stay out of the middle
99 BassCat Jag w/225 Merc Optimax Retired TXU Outage Manager
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|