This is a picture of the Texoma TRANSFORMER...Completely Dressed and Rigged Out.
I will have better pictures this weekend.
The weakest piece is the 45lb Surflon wire.
Second weakest is the 90 lb Coastlock Snap
As you can see, the Texoma Transformer is made up of the strongest and best components for catching HUGE Stripers, without component failures.
Open it up all the way, and you can troll like an Umbrella Rig, open half way, and remove the leaders, use 1/8th oz jig heads, and now it is a Castable RonRig.
The Texoma TRANSFORMER is made up of:
4 - 10" .051 wire for each Leg
1 - 16" .062 wire for the Center
2 - #3.5 Shiny Willow Blades on Each Leg
Other parts of the kit are:
4 - 8" 45lb Surflon Wire with loops on one end, and 90lb Coastlock Snap to connect to your Jig
4 - 8" 45lb Surflon Wire with Coastlock Snaps on each end to connect to the Special Swivel in the midde
1 - 14" 45lb Surflon Wire with loops on one end, and 90lb Coastlock Snap to connect to your Jig, that attaches to the Center wire.
10 - 1/0 or 2/0 1/8 oz Semi Nekid White jig heads for casting.
9 - 4/0 1/2 oz Semi Nekid White jig jeads for Trolling
Add the clip on Weights, and the RonRig Retriever, you have a complete Kit.