Forums59
Topics1,038,929
Posts13,955,628
Members144,183
|
Most Online39,925 Dec 30th, 2023
|
|
Revo STX problem
#10828690
05/08/15 06:46 PM
|
Joined: Mar 2009
Posts: 451
Hobbs McAvoy
OP
Angler
|
OP
Angler
Joined: Mar 2009
Posts: 451 |
I have an Abu Garcia Revo STX that is making a whining sound when I cast it. I took it apart and cleaned it but it still has a whine. It will cast fine for about 25 feet then it will whine and not go much farther. I'm guessing this is a brake issue? I have loosened everything but still having the same problem. Anyone have any suggestions? I will consider sending it to someone for repair/cleaning but I don't want to dump a lot of money in this reel. It is the most expensive reel I have and also has the most problems. I have some $50 h2o mettles that cast a mile and have worked for years without any problems. Thanks.
|
|
Re: Revo STX problem
[Re: Hobbs McAvoy]
#10828965
05/08/15 08:45 PM
|
Joined: Feb 2011
Posts: 5,809
Nathan "Bull" Montgomery
TFF Celebrity
|
TFF Celebrity
Joined: Feb 2011
Posts: 5,809 |
Sounds like bearings to me. take em back out and flush em out real good in some acetone or naptha(lighter fluid) might have to keep flushing them and test them and when you get them out and they are spinning nice and free for awhile add you a drop of oil and try again and see if that helps.
|
|
Re: Revo STX problem
[Re: Hobbs McAvoy]
#10829050
05/08/15 09:21 PM
|
Joined: Apr 2012
Posts: 3,275
03svtsnakevert
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2012
Posts: 3,275 |
I have an Abu Garcia Revo STX that is making a whining sound when I cast it. I took it apart and cleaned it but it still has a whine. It will cast fine for about 25 feet then it will whine and not go much farther. I'm guessing this is a brake issue? I have loosened everything but still having the same problem. Anyone have any suggestions? I will consider sending it to someone for repair/cleaning but I don't want to dump a lot of money in this reel. It is the most expensive reel I have and also has the most problems. I have some $50 h2o mettles that cast a mile and have worked for years without any problems. Thanks. it could also need new spool shims
|
|
Re: Revo STX problem
[Re: Hobbs McAvoy]
#10837796
05/12/15 02:27 PM
|
Joined: Feb 2007
Posts: 4,539
aggiegolfer
TFF Team Angler
|
TFF Team Angler
Joined: Feb 2007
Posts: 4,539 |
brakes/race are probably dirty. Pretty common issue on the dual braking reels made by any pure fishing company.
If it's a gen 1 it might be a bearing, but USUALLY the problem is not a bearing.
|
|
Re: Revo STX problem
[Re: Hobbs McAvoy]
#10838651
05/12/15 07:00 PM
|
Joined: Feb 2011
Posts: 5,809
Nathan "Bull" Montgomery
TFF Celebrity
|
TFF Celebrity
Joined: Feb 2011
Posts: 5,809 |
When in doubt clean it out! Worst case scenario is it doesn tchange anything. So I would just have someone clean it up real good and re lube everything. Youd be surprised at how much just a good cleaning can help.
|
|
Re: Revo STX problem
[Re: Nathan "Bull" Montgomery]
#10839933
05/13/15 03:10 AM
|
Joined: Apr 2012
Posts: 3,275
03svtsnakevert
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2012
Posts: 3,275 |
When in doubt clean it out! Worst case scenario is it doesn tchange anything. So I would just have someone clean it up real good and re lube everything. Youd be surprised at how much just a good cleaning can help. Agreed
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|