Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
laserbeak, ClayMaster100, JonnyW, Chrisb123, Craig Blaesing
108017 Registered Users
Top Posters
TexDawg 88626
hopalong 78895
Pilothawk 76393
John175® 67568
JDavis7873® 67390
FattyMcButterpants 60868
Derek 🐝 60270
Tritonman 57993
LoneStarSon® 54400
SkeeterRonnie 53366
facebook
Forum Stats
108017 Members
60 Forums
861176 Topics
12273776 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#10813557 - 05/02/15 10:54 AM Lower end unit question
Texan4Liberty Offline
TFF Celebrity

Registered: 07/16/09
Posts: 7095
Loc: San Angelo,Texas
I have a 200 Mariner motor and damaged my lower end unit and now needs to be replaced. I have a lower end unit that came off of my old boat that was a 175 Mercury. Everything with this old lower end unit looks the same as my other lower end, I mean exactly the same. I'm planning on changing the impeller and lower end grease on the old lower end unit, so my question is will it work on the 200 Mariner?
_________________________
God grant me the serenity to accept the things I cannot change; courage to change the things I can; and wisdom to know when to go fishing.

Top
#10813561 - 05/02/15 11:02 AM Re: Lower end unit question [Re: Texan4Liberty]
stick steering Offline
TFF Team Angler

Registered: 08/06/07
Posts: 4591
As long as the gear ratios are the same ,if you know the yr it'll help you , I'd bet there the same

Top
#10813566 - 05/02/15 11:07 AM Re: Lower end unit question [Re: Texan4Liberty]
TLW Offline
Extreme Angler

Registered: 11/16/06
Posts: 2315
Loc: ft worth
both "should be" 1.87's and bolt right up..

Top
#10814095 - 05/02/15 05:50 PM Re: Lower end unit question [Re: Texan4Liberty]
Texan4Liberty Offline
TFF Celebrity

Registered: 07/16/09
Posts: 7095
Loc: San Angelo,Texas
My 200 is a 98 model, and the 175 is a 93 model. On a side note: I hooked it up with no problem. took it out and ran it with a 23 pitch 4 blade Trophy prop and the hole shot was awesome, but only got up to 58 mph. My prop I normally use is a 24 pitch Fury and the hole shot isn't as good but can get up to 69 mph. Unfortunately it is unavailable to use right now, it is getting repaired.
_________________________
God grant me the serenity to accept the things I cannot change; courage to change the things I can; and wisdom to know when to go fishing.

Top
#10816670 - 05/04/15 08:13 AM Re: Lower end unit question [Re: Texan4Liberty]
Texan4Liberty Offline
TFF Celebrity

Registered: 07/16/09
Posts: 7095
Loc: San Angelo,Texas
hmmm
_________________________
God grant me the serenity to accept the things I cannot change; courage to change the things I can; and wisdom to know when to go fishing.

Top
#10816733 - 05/04/15 08:33 AM Re: Lower end unit question [Re: Texan4Liberty]
TLW Offline
Extreme Angler

Registered: 11/16/06
Posts: 2315
Loc: ft worth
ya need ta run it with tha fury ta get a good comparison.. that's your "base line".. I wouldn't think there would be that much difference but trophy's are all over tha place outta tha box as are most stock props...what about wfo rpm with each? possible 2 ta 1....

did ya buy both motors new?


Edited by TLW (05/04/15 08:42 AM)

Top
#10816772 - 05/04/15 08:51 AM Re: Lower end unit question [Re: Texan4Liberty]
Texan4Liberty Offline
TFF Celebrity

Registered: 07/16/09
Posts: 7095
Loc: San Angelo,Texas
wfo rpm?
_________________________
God grant me the serenity to accept the things I cannot change; courage to change the things I can; and wisdom to know when to go fishing.

Top
#10816835 - 05/04/15 09:15 AM Re: Lower end unit question [Re: Texan4Liberty]
TLW Offline
Extreme Angler

Registered: 11/16/06
Posts: 2315
Loc: ft worth
"max" rpm..."wide freakin' open" on this forum!

Top



© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide