Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Pres2014, springbass, TV308, jchapman, Ike_WSO
104460 Registered Users
Top Posters
TexDawg 84501
hopalong 76597
Pilothawk 74358
JDavis7873® 67382
John175 ® 62508
FattyMcButterpants 60659
Tritonman 57368
Derek 57339
SkeeterRonnie 52792
LoneStarSon® 52658
facebook
Forum Stats
104457 Members
60 Forums
837125 Topics
11950921 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#10782957 - 04/20/15 08:30 PM mariner problem
fivepinhunter Offline
Outdoorsman

Registered: 04/12/13
Posts: 81
i have a 98 efi 200 mariner.rebuilt powerhead in 06. just had injectors cleaned and adjusted with no major issues with them. replaced fuel bulb and fuel hose to motor. fuel hose size is 5/16. ran it on the lake sun for the first time and hit 3k rpm coming out of the hole but hole shot was awful, like its missing a little something. wot rpms were 5600 and 58mph. before my rpms were 5800-5900. 63-65mph. could new fuel line size cause this? any other ideas? thanks

Top
#10783582 - 04/21/15 05:11 AM Re: mariner problem [Re: fivepinhunter]
TLW Online   content
Extreme Angler

Registered: 11/16/06
Posts: 2086
Loc: ft worth
this start after tha injector service?.. tha 5/16" won't cause it..

Top
#10783773 - 04/21/15 07:48 AM Re: mariner problem [Re: fivepinhunter]
gary purdy Online   content
TFF Guru

Registered: 05/24/03
Posts: 10905
Loc: Littlefield Tx & Lake A. H. US...
Just a guess. Getting everything back in place without a leak on the fuel injection system can be tuff (a lot of "O"rings). I always pressure test it with fuel before re-installing. Don`t overlook the simple things like a spark plug wire coming off.
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top
#10784781 - 04/21/15 12:59 PM Re: mariner problem [Re: fivepinhunter]
fivepinhunter Offline
Outdoorsman

Registered: 04/12/13
Posts: 81
yes this started after injector service. i will check pressures. thanks for any ideas and suggestions

Top
#10785269 - 04/21/15 03:41 PM Re: mariner problem [Re: fivepinhunter]
TLW Online   content
Extreme Angler

Registered: 11/16/06
Posts: 2086
Loc: ft worth
like Gary says.. lotsa little parts, especially O-rings which need ta be replaced with new, injector harness (inside tha plenum) checked and etc.. did you get a chart with tha injectors with recommendation as to which injector needed ta be in which cylinder?.. flow chart showing what each one actually flowed after tha cleaning?.. new screens?...

a good service will include all that...


Edited by TLW (04/21/15 03:48 PM)

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide