Originally Posted By: northtexascrappiehunter
i bet you I can get it out
King Arthur over here..
Originally Posted By: smooth move
take the whole plate out and replace it. they're not very expansive.
This is what I would do
So none of the above happen
The mount is fiberglass into the cap , cutting the deck never was a option.
I ended up drilling a hole threw the post. Taking a piece of 1/2 rod stock , taking a come along and hanging it from a tree, picking up the boat. took a pipe wrench and a 1 pound sledge hammer I took about 30 wackes with the sledge and the boat fell down, and the post out. It was not rusted in, the paint was still like new. It was just stuck.