All

I just picked up an 8-foot stakeout pole and am trying to figure out best way to keep it with me in the yak. I have a Native Ultimate FX15 with gear tracks. I am thinking there may be some clips made for the gear tracks but I have not done a ton of research. The YakAttack website had clips but it looked like you had to screw them into the boat.

Any ideas or other ways of carrying something like this are appreciated.

Thx!

I have an x13 that has bungee cord holders for the paddle. I use those to strap it on and it rides perfect on the side of the kayak.

same with the Outback.

Yak attack offers a park n pole holder. It's similar to a paddle taco clip. Should be an easy mod

Using my already attached side handle, I rigged some yak sized bungee cord under each end. Pulled the screw, put on the bungee, replaced the screw. you might have to use a longer screw.

I then had to screw (one screw) a hook type keeper on..... to make the bungee into a paddle/stick-it anchor type of holder. Paddle on one side, anchor stick on the other. richg99

Mountain Sports has a Yak Attack park n pole clip that will work on tracks. I can send pics if necessary. Those things are a challenge to stow on the yak!